Solar Chevron Manufacturers

Road Furniture Manufacturers

1. Solar Chevrons used for guiding the motorists to warn and change the driving courses as required.

2. Mainly 66LEDs with PC shall be affixed in such away that it will form the shape of arrow.

Colors

Manufacturers

UOM

Pcs

Material

Metal

Dimensions

750 x 600 mm

1. No Power Cost, Power Charge From The Sun Directly.

2. Inbuilt In Long-life maintenance-free Battery.

3. Overcharge protection circuit.

4. Flashing frequency approximately 60/ per minute, according to the arrow Direction Glitters.

5. Clamp Suitable For 75 mm Dia Pole.

6. Blinking Frequency is 40 to 50 per minute as required & reflective tape with high intensity tape of 3m.

7. Low maintenance.

8. Clearly visible.

1. To Warn at Diversion road constructions, rounds ,Highway Intersections.

2. Tunnel entrance, approach to over / under bridges.

3. Curved roads, Sharp curves, Hair Pin bends, for turning corner Guidance.
.
4. Each shining day of charging could last flashing for 180 hours, automatic flashing at night time, .

5. Exit and entry direction.

6. Its convenient to install it anywhere.

1. ISO 9001:2015

2. ISI Certified

Enquiry Now

Also Known As: Solar Chevron Manufacturers | Solar Chevron Sign Manufacturers | Solar LED Chevron Sign Manufacturers | Solar Chevron Light Manufacturers | YNM Safety.

Description

1. Electronic Solar Chevron Signs are used at diversions, road curves and road work zones. These are highly reflective sign boards for clear visibility of the road directions.

2. A warning sign is a type of sign which indicates a potential hazard, obstacle or condition.

3. Chevron-shaped symbols or arrows on rectangular signs may be placed at the actual location of the Crosswalk alert with solar-powered lit outline.

4. Made of Aluminum Composite panel having Aluminum foil of thickness 0.2mm on both the side affixed with yellow high intensity prismatic sheet.

5. Solar panel will be placed on top of the board of volt, 220mA along with rechargeable battery of 7.2 volt, 2500mA shall be provided for continues blinking of LED during the Night after Approx. 6 hrs Recharging during the day.

6. Board Panel shall be covered with the same size of 6 mm Acrylic sheet. Mounted on MS Pipe of 65mm dia 1.2 mm thick with height of 3750 mm.

7. The outer of iron covering through yellow baking Powder coating processing, but the main parts in the display are made of Aluminum Sheet 2 mm.