Aged Asphalt
Aged highway asphalt where binder has oxidised and weathered.
Alternative names
- Project Locations
- Installation Sites
- Field Applications
- Infrastructure Applications
- Safety Applications

YNM Safety manufactures Primer for Thermoplastic Paint (YNM-116 / PRIMER T) — substrate primer that maximises adhesion between asphalt/concrete and hot-applied thermoplastic road markings.
| Parameter | Specification |
|---|---|
| Product Type | Thermoplastic Primer (Solvent Based) |
| Code | PRIMER T (YNM-116) |
| Application | Roller |
| Coverage | 0.15–0.25 L/m² |
| Dry to Touch | 15–20 minutes |
| Recoat Window | 30 min to 2 hours |
| Compatible With | All YNM hot thermoplastic paints |
| Drying Time | Surface dry 20 – 40 min at 25°C (typical) |
| Shelf Life | 12 months sealed, stored 5 – 35°C |
Primer for Thermoplastic Paint (YNM-116 / PRIMER T) is a solvent-based bond coat manufactured by YNM Safety for use as a substrate preparation layer before application of hot thermoplastic road marking paints. The primer penetrates into asphalt and concrete surfaces, wetting out dust and loose particles, and creates a tacky surface that maximises the bond strength of the subsequent thermoplastic layer.
Proper priming is critical on aged asphalt, polished concrete, cold pavements and surfaces with marginal preparation — without priming, thermoplastic markings can delaminate within weeks on these surfaces. PRIMER T resolves this by providing a consistent, strong bond layer that extends thermoplastic service life to specification-design values.
YNM-116 is supplied in 20 L cans for field application by roller at approximately 0.15–0.25 L/m² coverage, dries to touch in 15–20 minutes under dry ambient conditions, and must be overcoated with thermoplastic within 2 hours.
Technical, packing and manufacturing details buyers check first
6 application areas — top alternative names.
Aged highway asphalt where binder has oxidised and weathered.
Alternative names
Concrete highway, airport and urban pavement surfaces.
Alternative names
Runway and taxiway concrete surfaces before thermoplastic centreline marking.
Alternative names
Multi-storey concrete parking surfaces requiring thermoplastic marking.
Alternative names
Winter and early-morning marking where substrate surface temperature is low.
Alternative names
Over-marking existing faded thermoplastic with fresh thermoplastic.
Alternative names
Key features and product advantages of our Primer For Thermoplastic Paint Manufacturers
Quality certifications that ensure premium product quality
ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, ISO 50001:2018, CE, and GMP
Quality Management System Certification
View CertificateEnvironmental Management System Certification
View CertificateOccupational Health & Safety Management Certification
View CertificateEnergy Management System Certification
View CertificateEuropean Conformity (CE) Certification
View CertificateGood Manufacturing Practice Certification
View CertificateOur Primer For Thermoplastic Paint Manufacturers is available and exported to 192 countries worldwide
Plant capacity from our Hyderabad manufacturing
Primer for Thermoplastic Paint is manufactured under tight solvent balance and resin activity control.
Synthetic resin batch-tested for molecular weight, acid value and dry time.
Xylene/MS solvent blend balanced for flash-off rate and substrate wetting.
Resin dissolved in solvent with controlled agitation and temperature.
Surfactants added for optimum wetting on asphalt, concrete and polished surfaces.
Final viscosity tuned for roller application at 20 °C.
Batch tested for touch-dry and recoat window compliance.
Bond strength tested by pull-off on reference asphalt and concrete substrates.
UN-approved 20 L cans filled under controlled environment.
DG-compliant despatch with MSDS and application guide.
Answers about this product from YNM Safety—manufacturing, standards, supply, and support.
YNM Mega Industries Pvt Ltd is an Indian manufacturer and exporter of road marking paints, metal beam crash barriers, parking marking paints, and floor coatings, based in Telangana with supply across India and 50+ countries.
Use the Get Quote page on ynmsafety.com, email sales@ynmsafety.com or rishu@ynmsafety.com, or call +91-8121550143 with product name, quantities, standards, and delivery location.
YNM Safety holds ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, ISO 50001:2018, CE, and GMP certificates. Product-specific test reports are issued as per order and tender requirements.
Yes. YNM Safety provides export packing, documentation, and logistics coordination for sea and air freight subject to destination regulations.
Our manufacturing and operations are based in Rangareddy, Telangana, India, with pan-India supply and international export programs.
Yes. YNM Safety exports MMA resin cold plastic paint, airfield marking paint, glow in the dark paint, crash barriers, parking marking paints, and floor coatings to 50+ countries across Africa, the Middle East, and Southeast Asia with export-grade packaging and documentation.