YNM Safety manufactures industrial floor coatings (YNM-126) — epoxy and PU floor coating systems for warehouses, plants, car parks, workshops and hygiene areas.
Real-time statistics showcasing our product excellence
| Parameter | Specification |
|---|---|
| Product Type | Epoxy / Polyurethane Floor Coating |
| Systems | Coating, high-build, self-levelling |
| Application | Roller / squeegee / airless spray |
| Build | 300 microns to 3 mm by system |
| Curing | Light traffic 24 h; full cure 7 days |
| Finish | Gloss / matt / anti-skid |
| Standards | ASTM D4060, ASTM D4541, IS 101 |
| Substrates | Concrete, screed, existing epoxy |
Floor Coatings (YNM-126) is an epoxy and polyurethane floor coating range manufactured by YNM Safety for industrial and commercial floors that must carry traffic, resist chemicals and stay clean. An uncoated concrete floor dusts continuously as its surface laitance breaks down, contaminating products and equipment, and it absorbs oil and chemical spills that then cannot be removed.
The range spans solvent-free epoxy coatings for general industrial floors, high-build and self-levelling systems where a seamless monolithic surface is required, and polyurethane topcoats where UV stability and greater flexibility are needed — such as exposed car park decks. Anti-skid aggregate can be broadcast into ramps and wet areas.
YNM-126 is specified in warehouses and distribution centres, manufacturing plants and assembly floors, car park decks and ramps, heavy vehicle workshops, food and pharmaceutical hygiene areas, and laboratory and clean-room floors where cleanability is a compliance requirement.
Complete product information including dimensions, origin, and manufacturing details
Our Floor Coatings is available and exported to 30+ worldwide
United States
Canada
Mexico
Germany
United Kingdom
France
Italy
Spain
Netherlands
Sweden
Poland
China
India
Japan
South Korea
Australia
Singapore
Thailand
Indonesia
Malaysia
Vietnam
United Arab Emirates
Saudi Arabia
Qatar
Kuwait
Oman
South Africa
Nigeria
Kenya
Egypt
Ghana
Brazil
Argentina
Chile
Colombia
PeruKey features and product advantages of our Floor Coatings
Where our Floor Coatings provides maximum road safety and protection
Racking aisles, picking areas and loading bays under forklift traffic.
Assembly floors, machine bases and process areas in production plants.
Multi-storey and basement car park decks, ramps and turning circles.
Service bays, wash bays and inspection pits in vehicle workshops.
Production halls, packing rooms and cold stores with hygiene requirements.
Laboratory floors, clean rooms and electronics assembly areas.
Industrial Floor Coatings Market
Warehousing and logistics build-out, manufacturing capex and tightening hygiene standards are the primary drivers of industrial floor coating demand.
Floor coating manufacture centres on resin and hardener stoichiometry, abrasion testing and pot-life verification for every batch.
Epoxy and PU resins tested for epoxy equivalent weight, viscosity and colour.
Hardener stoichiometry matched to resin for full cross-link density.
Graded quartz and fillers selected for build, flow and abrasion resistance.
Pigments and fillers dispersed to target fineness of grind.
Mixed samples timed for usable pot life at ambient and hot conditions.
Cured films abrasion tested to ASTM D4060 for wear resistance.
Pull-off adhesion verified on prepared concrete to ASTM D4541.
Base and hardener packed as matched kits with mixing instructions.
TDS, MSDS and batch certificate despatched with order.
Quality certifications that ensure premium product quality
Compliance with national and international road safety standards
Quality Management System Certification
Compliant with relevant Indian Standard specifications
Conforms to applicable ASTM and international standards
Export-standard packaging and documentation
Answers about this product from YNM Safety—manufacturing, standards, supply, and support.
Epoxy gives high hardness, abrasion resistance and chemical resistance, which suits interior industrial floors and warehouses. Polyurethane is more flexible and UV stable, so it is preferred for exposed areas such as car park decks and top coats over epoxy.
High-build epoxy systems are specified in racking aisles and loading bays, where concentrated point loads and constant wheel abrasion are the governing conditions. Share your traffic type and slab condition for a system recommendation.
Yes. Anti-skid aggregate is broadcast into the coating on ramps, turning circles and wash-down areas to raise slip resistance where tyres scuff and water is present.
Seamless, coved, non-tainting finishes are used for food and pharmaceutical floors so they withstand frequent washdown and sanitiser without degrading, and can be cleaned to a documented standard.
Concrete is mechanically prepared by grinding or shot blasting to remove laitance and open the surface, and moisture content is checked. Light traffic is typically possible after about 24 hours with full chemical cure at around 7 days.
YNM Mega Industries Pvt Ltd is an Indian manufacturer and exporter of road marking paints, metal beam crash barriers, retro reflective signages, and related road safety products, based in Telangana with supply across India and 50+ countries.
